通过 StackExchange.Redis 连接到 Redis Servier

我尝试使用以下方法制作一个测试项目Redis https://redis.io服务器，通过 Virtual Box 安装在 Linux Ubuntu 虚拟机上。

Linux 机器通过 Virtual Box 的桥接适配器与本地网络连接，Virtual Box 运行在我的开发 Windows 7 机器上。

Linux 机器是一台新机器，刚刚创建，我做了

sudo ufw enable

然后重新启动redis服务器（在linux上）。

现在这是我在 Windows 上的尝试

C:\Users\my-user>nmap -p 6379 10.14.30.51
Starting Nmap 7.70 ( https://nmap.org ) at ...
Nmap scan report for 10.14.30.51
Host is up (0.0010s latency).

PORT     STATE    SERVICE
6379/tcp filtered redis
MAC Address: 08:00:27:98:94:49 (Oracle VirtualBox virtual NIC)

我使用 Visual Studio 2017 创建了一个新的 .NET MVC 项目，以下是控制器的代码：

using StackExchange.Redis;
using System.Web.Mvc;

namespace RedisClient.Controllers
{
    public class HomeController : Controller
    {
        public struct Server {
            public const string IP = "10.14.30.51";
            public const int Port = 6379;
        }

        public ActionResult Index() { return View(); }

        public ActionResult About()
        {            
            ConnectionMultiplexer redis = 
                ConnectionMultiplexer.Connect($"{Server.IP}:{Server.Port}"); 

            IDatabase db = redis.GetDatabase();
            string value = "abcdefg";
            db.StringSet("mykey", value);
            value = db.StringGet("mykey");

            ViewBag.Message = $"The value is '{value}'";

            return View();
        }

        public ActionResult Contact() { return View(); }
    }
}

因此，当我单击“关于”链接时，我收到以下错误.Connect line

无法连接到 Redis 服务器。无法连接 于 10.14.30.51:6379/交互式，正在初始化/未启动，最后：无， 来源：BeginConnectAsync，未完成：0，上次读取：0 秒前， 最后写入：0 秒前，保持活动：60 秒，状态：正在连接，mgr：10 个，共 10 个 可用，最后一次心跳：从不，全局：0 秒前，v：2.0.601.3402

--EDIT

的输出

var log = new StringWriter();

ConnectionMultiplexer redis = ConnectionMultiplexer.Connect(
    $"{Server.IP}:{Server.Port},abortConnect=False", log);
var logOutput = log.ToString();

如下：

10.14.30.51:6379,abortConnect=False

Connecting 10.14.30.51:6379/Interactive...
BeginConnect: 10.14.30.51:6379
1 unique nodes specified
Requesting tie-break from 10.14.30.51:6379 > __Booksleeve_TieBreak...
Allowing endpoints 00:00:05 to respond...
Awaiting task completion, IOCP: (Busy=0,Free=1000,Min=4,Max=1000), WORKER: (Busy=1,Free=8190,Min=4,Max=8191)
Not all tasks completed cleanly (from ReconfigureAsync#1524, timeout 5000ms), IOCP: (Busy=0,Free=1000,Min=4,Max=1000), WORKER: (Busy=4,Free=8187,Min=4,Max=8191)
10.14.30.51:6379 did not respond
Waiting for tiebreakers...
Awaiting task completion, IOCP: (Busy=0,Free=1000,Min=4,Max=1000), WORKER: (Busy=4,Free=8187,Min=4,Max=8191)
connection failed: 10.14.30.51:6379 (Subscription, UnableToConnect): UnableToConnect on 10.14.30.51:6379/Subscription, Initializing/NotStarted, last: NONE, origin: BeginConnectAsync, outstanding: 0, last-read: 5s ago, last-write: 5s ago, keep-alive: 60s, state: Connecting, mgr: 10 of 10 available, last-heartbeat: never, global: 0s ago, v: 2.0.601.3402
connection failed: 10.14.30.51:6379 (Interactive, UnableToConnect): UnableToConnect on 10.14.30.51:6379/Interactive, Initializing/NotStarted, last: NONE, origin: BeginConnectAsync, outstanding: 0, last-read: 5s ago, last-write: 5s ago, keep-alive: 60s, state: Connecting, mgr: 10 of 10 available, last-heartbeat: never, global: 0s ago, v: 2.0.601.3402
Finished awaiting tasks, IOCP: (Busy=2,Free=998,Min=4,Max=1000), WORKER: (Busy=4,Free=8187,Min=4,Max=8191)
10.14.30.51:6379 failed to nominate (Faulted)
> UnableToConnect on 10.14.30.51:6379/Interactive, Initializing/NotStarted, last: NONE, origin: BeginConnectAsync, outstanding: 0, last-read: 5s ago, last-write: 5s ago, keep-alive: 60s, state: Connecting, mgr: 10 of 10 available, last-heartbeat: never, global: 0s ago, v: 2.0.601.3402
No masters detected
10.14.30.51:6379: Standalone v2.0.0, master; keep-alive: 00:01:00; int: Connecting; sub: Connecting; not in use: DidNotRespond
10.14.30.51:6379: int ops=0, qu=0, qs=0, qc=0, wr=0, socks=2; sub ops=0, qu=0, qs=0, qc=0, wr=0, socks=2
Circular op-count snapshot; int: 0 (0,00 ops/s; spans 10s); sub: 0 (0,00 ops/s; spans 10s)
Sync timeouts: 0; async timeouts: 0; fire and forget: 0; last heartbeat: -1s ago
resetting failing connections to retry...
retrying; attempts left: 2...
1 unique nodes specified
Requesting tie-break from 10.14.30.51:6379 > __Booksleeve_TieBreak...
Allowing endpoints 00:00:05 to respond...
Awaiting task completion, IOCP: (Busy=1,Free=999,Min=4,Max=1000), WORKER: (Busy=2,Free=8189,Min=4,Max=8191)
Not all tasks completed cleanly (from ReconfigureAsync#1524, timeout 5000ms), IOCP: (Busy=0,Free=1000,Min=4,Max=1000), WORKER: (Busy=2,Free=8189,Min=4,Max=8191)
10.14.30.51:6379 did not respond
Waiting for tiebreakers...
Awaiting task completion, IOCP: (Busy=0,Free=1000,Min=4,Max=1000), WORKER: (Busy=2,Free=8189,Min=4,Max=8191)
Not all tasks completed cleanly (from NominatePreferredMaster#1761, timeout 50ms), IOCP: (Busy=0,Free=1000,Min=4,Max=1000), WORKER: (Busy=2,Free=8189,Min=4,Max=8191)
10.14.30.51:6379 failed to nominate (WaitingForActivation)
No masters detected
10.14.30.51:6379: Standalone v2.0.0, master; keep-alive: 00:01:00; int: Disconnected; sub: Disconnected; not in use: DidNotRespond
10.14.30.51:6379: int ops=0, qu=0, qs=0, qc=0, wr=0, socks=2; sub ops=0, qu=0, qs=0, qc=0, wr=0, socks=2
Circular op-count snapshot; int: 0 (0,00 ops/s; spans 10s); sub: 0 (0,00 ops/s; spans 10s)
Sync timeouts: 0; async timeouts: 0; fire and forget: 0; last heartbeat: -1s ago
resetting failing connections to retry...
retrying; attempts left: 1...
1 unique nodes specified
Requesting tie-break from 10.14.30.51:6379 > __Booksleeve_TieBreak...
Allowing endpoints 00:00:05 to respond...
Awaiting task completion, IOCP: (Busy=0,Free=1000,Min=4,Max=1000), WORKER: (Busy=2,Free=8189,Min=4,Max=8191)
Not all tasks completed cleanly (from ReconfigureAsync#1524, timeout 5000ms), IOCP: (Busy=0,Free=1000,Min=4,Max=1000), WORKER: (Busy=5,Free=8186,Min=4,Max=8191)
10.14.30.51:6379 did not respond
Waiting for tiebreakers...
Awaiting task completion, IOCP: (Busy=0,Free=1000,Min=4,Max=1000), WORKER: (Busy=5,Free=8186,Min=4,Max=8191)
Finished awaiting tasks, IOCP: (Busy=0,Free=1000,Min=4,Max=1000), WORKER: (Busy=2,Free=8189,Min=4,Max=8191)
10.14.30.51:6379 failed to nominate (Faulted)
> UnableToConnect on 10.14.30.51:6379/Interactive, Initializing/NotStarted, last: NONE, origin: BeginConnectAsync, outstanding: 0, last-read: 5s ago, last-write: 5s ago, keep-alive: 60s, state: Connecting, mgr: 10 of 10 available, last-heartbeat: never, global: 10s ago, v: 2.0.601.3402
No masters detected
10.14.30.51:6379: Standalone v2.0.0, master; keep-alive: 00:01:00; int: Disconnected; sub: Disconnected; not in use: DidNotRespond
10.14.30.51:6379: int ops=0, qu=0, qs=0, qc=0, wr=0, socks=3; sub ops=0, qu=0, qs=0, qc=0, wr=0, socks=3
Circular op-count snapshot; int: 0 (0,00 ops/s; spans 10s); sub: 0 (0,00 ops/s; spans 10s)
Sync timeouts: 0; async timeouts: 0; fire and forget: 0; last heartbeat: -1s ago
Starting heartbeat...

==参考文献

在我的 .csproj 文件中，我有

<Reference Include="System.Buffers, Version=4.0.3.0, Culture=neutral, PublicKeyToken=cc7b13ffcd2ddd51, processorArchitecture=MSIL">
  <HintPath>..\packages\System.Buffers.4.5.0\lib\netstandard2.0\System.Buffers.dll</HintPath>
</Reference>
...
<Reference Include="System.Runtime.CompilerServices.Unsafe, Version=4.0.4.1, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=MSIL">
  <HintPath>..\packages\System.Runtime.CompilerServices.Unsafe.4.5.2\lib\netstandard2.0\System.Runtime.CompilerServices.Unsafe.dll</HintPath>
</Reference>
...
<Reference Include="System.Numerics.Vectors, Version=4.1.4.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=MSIL">
  <HintPath>..\packages\System.Numerics.Vectors.4.5.0\lib\net46\System.Numerics.Vectors.dll</HintPath>
</Reference>

相关的带有其他详细信息的超级用户问题在这里 https://superuser.com/q/1435346/465922.

Windows:

Linux:

多亏了这个SF的回答 https://serverfault.com/a/967036/312894我能够使 Windows 主机和 Linux 虚拟机进行通信。

我所做的步骤：

在 Redis 服务器 (Linux) 计算机上：

1) ss -tlnp 'sport == :6379'如果你发现127.0.0.1 or ::1在这些行中，您应该编辑 redis.config 文件，注释bind 127.0.0.1 ::1在配置文件中（如果还没有），并且不要忘记重启redis更改配置后。
如果你看到类似的东西0.0.0.0:6379，执行下一步。

2) 检查protected mode的Redis在同一个配置文件中，如果启用并且你想保留它，你可以使用requirepass <yourConnectionPassToUseOnClientConnectionString>在 Redis 配置文件中。

3) 检查您的客户端 IP 地址（在我的例子中是 Windows 客户端计算机）。 将其添加到Linuxiptables:

iptables -A INPUT --src <clientIpAddress> -p tcp --dport 6379 -j ACCEPT

3') 为了添加这个条目执着的，看看如何保存iptables state here https://askubuntu.com/a/373526.

在客户端 (Windows) 计算机上：

4）在连接字符串中使用上述密码连接Linux Redis服务器

ConnectionMultiplexer redis = 
  ConnectionMultiplexer.Connect($"{Server.IP}:{Server.Port},resolvedns=1,abortConnect=False,password={Server.Password}");

5*) （可选）您可以添加可以获得 Windows 版本来自巧克力 https://chocolatey.org/packages/redis-64（在 Windows 上安装），使用 cmd 测试客户端 Windows 的连接

redis-cli -h <LinuxServerIP> -p 6379 ping