通过按同一个按钮来打开/关闭 MapKit 叠加？

我有一个带有工具栏按钮的 MapView，按下该按钮时会向 MapView 添加叠加层。我想要的是按钮（IBAction）检查地图上是否已经有覆盖物，如果有，则删除，如果没有，则添加它们。

我当前添加叠加层的代码如下：

- (IBAction)waterWaysAction:(id)sender 
{
NSLog(@"WaterWays pushed");

if ([mapView overlays]) {
    [mapView removeOverlays:[mapView overlays]];
    NSLog(@"WaterWays removed");
} else {
// ******* adds the overlays for the waterways **********
// inner harbor
CLLocationCoordinate2D  innerHarborPoints[13] = {
    CLLocationCoordinate2DMake(43.02313691051886, -87.90539558418189),
    CLLocationCoordinate2DMake(43.0213450482963, -87.90596442438722),
    CLLocationCoordinate2DMake(43.01721422337822, -87.90249007832719),
    CLLocationCoordinate2DMake(43.0141641230024, -87.90402523886414),
    CLLocationCoordinate2DMake(43.00858391833174, -87.8971780500095),
    CLLocationCoordinate2DMake(43.016711699807, -87.90156448365555),
    CLLocationCoordinate2DMake(43.01692320142091, -87.90093306118753),
    CLLocationCoordinate2DMake(43.02204743639911, -87.90385746629964),
    CLLocationCoordinate2DMake(43.02400128319255, -87.90186558765494),
    CLLocationCoordinate2DMake(43.02441284233703, -87.89897827382163),
    CLLocationCoordinate2DMake(43.02564995691736, -87.89925323299293),
    CLLocationCoordinate2DMake(43.02549123239004, -87.90378517804325),
    CLLocationCoordinate2DMake(43.02313691051886, -87.90539558418189)};
MKPolygon *innerHarborPolygon = [MKPolygon polygonWithCoordinates:innerHarborPoints count:13];
innerHarborPolygon.title = @"Inner Harbor";
[mapView addOverlay:innerHarborPolygon];
NSLog(@"WaterWays added");
}
}

此代码一次用于添加覆盖层，一次用于删除它。之后（从查看日志输出）看来功能（按钮）认为 MapView 上仍然有覆盖层，因此需要不断删除它们（即使它们不再存在）。

预先感谢您的任何帮助！

尝试检查count改为覆盖数组：

if ([[mapView overlays] count] > 0) {

无需检查count, the overlays数组可以不为零，但没有对象。