在 Android 上将 USB 波特率从 9600 更改为 115200

我有一个 Arduino，它以 115200 波特率串行发送数据。

有一个应用程序以 9600 波特率从 Arduino 接收数据。代码是

    // Arduino USB serial converter setup
    // Set control line state
    mUsbConnection.controlTransfer(0x21, 0x22, 0, 0, null, 0, 0);
    // Set line encoding.
    mUsbConnection.controlTransfer(0x21, 0x20, 0, 0, getLineEncoding(9600), 7, 0);
    //mUsbConnection.controlTransfer(0x21, 0x20, 0x001A, 0, getLineEncoding(9600), 7, 0);

然后在获取行编码()功能

private byte[] getLineEncoding(int baudRate) {
    final byte[] lineEncodingRequest = { (byte) 0x80, 0x25, 0x00, 0x00, 0x00, 0x00, 0x08 };
    switch (baudRate) {
    case 14400:
        lineEncodingRequest[0] = 0x40;
        lineEncodingRequest[1] = 0x38;
        break;

    case 19200:
        lineEncodingRequest[0] = 0x00;
        lineEncodingRequest[1] = 0x4B;
        break;
    }

    return lineEncodingRequest;
}

有一个 switch case 结构用于将波特率设置为 9600、14400 或 19200。但我希望它是115200谁能告诉我该怎么做？

这是一个修改后的函数，可将上述函数推广到其他波特率：

private byte[] getLineEncoding(int baudRate) {
    final byte[] lineEncodingRequest = { (byte) 0x80, 0x25, 0x00, 0x00, 0x00, 0x00, 0x08 };
    //Get the least significant byte of baudRate, 
    //and put it in first byte of the array being sent
    lineEncodingRequest[0] = (byte)(baudRate & 0xFF);

    //Get the 2nd byte of baudRate,
    //and put it in second byte of the array being sent
    lineEncodingRequest[1] = (byte)((baudRate >> 8) & 0xFF);

    //ibid, for 3rd byte (my guess, because you need at least 3 bytes
    //to encode your 115200+ settings)
    lineEncodingRequest[2] = (byte)((baudRate >> 16) & 0xFF);

    return lineEncodingRequest;

}