ESP8266+0.96OLED驱动显示（I2C）

2023-05-16

文章目录

ESP8266
- 一.简介
- 二.管脚定义
- 三.代码

ESP8266

一.简介

这篇我们说一下ESP8266来驱动OLED显示屏显示，这里使用的是I2C的屏幕，像Arduino中有好几个库可以驱动屏幕，但是都是封装好的像I2C的两个控制管脚都封进去了，不能理解，这样移植性就特别差了，今天我给大家分享一下的该的，很好理解，移植性很强，相信大家和我一样都希望同一代码可以在多个平台下使用。

我的测试环境具体的环境如下

开发环境：Arduino IDE
开发板：ESP8266-12F
屏幕：0.96寸OLED（4针I2C）

二.管脚定义

I2C接口，这里使用的是软件I2C，SCL时钟管脚为D0，SDA数据管脚为D1，当然这里你可以自己定义，只要是普通IO口都是可可以的

OLED	ESP8266
VCC	VCC(3.3V)
GND	GND
SCL	D0(GPIO16)
SDA	D1(GPIO5)

三.代码

代码为Arduino环境下的代码，在其他平台如51单片机，可以将控制IO的宏定义函数修改就可以了，测试工程代码还包括字库oledfont.h，这里使用中景园的，说的没有多注释很详细，重点看程序

代码比较长，方便大家测试和浏览我将工程下载路径放在下面
下载地址：OLED_I2C驱动

OLED.ino

//   
//本程序只供学习使用，未经作者许可，不得用于其它任何用途
//  文 件 名   : oled.c
//  作    者   : oldzhai
//  生成日期   : 2021-1-18
//  功能描述   : ESP8266 OLED显示屏I2C驱动显示
//              说明: 
//              ----------------------------------------------------------------
//              GND  电源地
//              VCC  3.3v电源
//              D0   GPIO16（SCL）
//              D1   GPIO5 （SDA）  
//              ----------------------------------------------------------------
//******************************************************************************/
#include "oledfont.h" //字库

//I2C管脚的定义
#define SCL D0
#define SDA D1

//输出电平的宏定义
#define I2C_SCL_L digitalWrite(SCL,LOW)//SCL
#define I2C_SCL_H digitalWrite(SCL,HIGH)

#define I2C_SDA_L digitalWrite(SDA,LOW)//SDA
#define I2C_SDA_H digitalWrite(SDA,HIGH)

//管脚模式的宏定义
#define SCL_IN   pinMode(SCL, INPUT)   
#define SCL_OUT  pinMode(SCL, OUTPUT) //SCL
#define SDA_IN   pinMode(SDA, INPUT) 
#define SDA_OUT  pinMode(SDA, OUTPUT) //SDA

#define OLED_CMD  0  //写命令
#define OLED_DATA 1 //写数据

void setup()
{
  OLED_Init();
  OLED_ColorTurn(0);//0正常显示 1反色显示
  OLED_DisplayTurn(0);//0正常显示 1翻转180度显示
}

void loop()
{
  OLED_DrawBMP(0,0,128,64,BMP1); //显示图片
  delay(1000); //延时1秒
  OLED_Clear();//清除界面
  
  OLED_ShowString(0,0,"OLDZHAI",16);
  OLED_ShowString(20,4,"2021/1/18",16);
  OLED_ShowString(0,6,"ASCII:",16);  
  OLED_ShowString(63,6,"CODE:",16);
  delay(1000); //延时1秒 delay函数的单位为ms
  OLED_Clear();
}


//I2C初始化
void I2C_Init()
{
  SDA_OUT;
  SCL_OUT;
  I2C_SDA_H;
  I2C_SCL_H;
}

//I2C开始
void I2C_Start()
{
  I2C_SCL_H;
  I2C_SDA_H;
  I2C_SDA_L;
  I2C_SCL_L;
}

//I2C结束
void I2C_Stop()
{
  I2C_SCL_H;
  I2C_SDA_L;
  I2C_SDA_H;
}

//检查应答信号
void I2C_Wait_Ack()
{
    I2C_SDA_H;
    I2C_SCL_H;
    I2C_SCL_L;
}

//I2C写入一个字节
void Write_I2C_Byte(unsigned char dat)
{
  unsigned char i;
  
  for(i=0;i<8;i++)    
  {
    I2C_SCL_L;
    if( dat & 0x80 )
    {
      I2C_SDA_H;  
    }
    else
    {
      I2C_SDA_L;
    }
    dat <<= 1;
    I2C_SCL_H;
   }
   I2C_SCL_L;
}

//发送一个字节
//向SSD1306写入一个字节。
//mode:数据/命令标志 0,表示命令;1,表示数据;
void OLED_WR_Byte(u8 dat,u8 mode)
{
  I2C_Start();
  Write_I2C_Byte(0x78);
  I2C_Wait_Ack();
  if(mode){
    Write_I2C_Byte(0x40);
  }
  else{
    Write_I2C_Byte(0x00);
  }
  I2C_Wait_Ack();
  Write_I2C_Byte(dat);
  I2C_Wait_Ack();
  I2C_Stop();
}

//反显函数
void OLED_ColorTurn(u8 i)
{
  if(!i) OLED_WR_Byte(0xA6,OLED_CMD);//正常显示
  else  OLED_WR_Byte(0xA7,OLED_CMD);//反色显示
}

//屏幕旋转180度
void OLED_DisplayTurn(u8 i)
{
  if(i==0)
  {
      OLED_WR_Byte(0xC8,OLED_CMD);//正常显示
      OLED_WR_Byte(0xA1,OLED_CMD);
  }
  else
  {
    OLED_WR_Byte(0xC0,OLED_CMD);//反转显示
    OLED_WR_Byte(0xA0,OLED_CMD);
  }
}

//坐标设置
void OLED_Set_Pos(u8 x, u8 y) 
{ 
  OLED_WR_Byte(0xb0+y,OLED_CMD);
  OLED_WR_Byte(((x&0xf0)>>4)|0x10,OLED_CMD);
  OLED_WR_Byte((x&0x0f),OLED_CMD);
}
       
//开启OLED显示    
void OLED_Display_On(void)
{
  OLED_WR_Byte(0X8D,OLED_CMD);  //SET DCDC命令
  OLED_WR_Byte(0X14,OLED_CMD);  //DCDC ON
  OLED_WR_Byte(0XAF,OLED_CMD);  //DISPLAY ON
}

//关闭OLED显示     
void OLED_Display_Off(void)
{
  OLED_WR_Byte(0X8D,OLED_CMD);  //SET DCDC命令
  OLED_WR_Byte(0X10,OLED_CMD);  //DCDC OFF
  OLED_WR_Byte(0XAE,OLED_CMD);  //DISPLAY OFF
}
            
//清屏函数,清完屏,整个屏幕是黑色的!和没点亮一样!!!   
void OLED_Clear(void)  
{  
  u8 i,n;       
  for(i=0;i<8;i++)  
  {  
    OLED_WR_Byte (0xb0+i,OLED_CMD);    //设置页地址（0~7）
    OLED_WR_Byte (0x00,OLED_CMD);      //设置显示位置—列低地址
    OLED_WR_Byte (0x10,OLED_CMD);      //设置显示位置—列高地址   
    for(n=0;n<128;n++)OLED_WR_Byte(0,OLED_DATA); 
  } //更新显示
}

//在指定位置显示一个字符
//x:0~127
//y:0~63         
//sizey:选择字体 6x8  8x16
void OLED_ShowChar(u8 x,u8 y,const u8 chr,u8 sizey)
{       
  u8 c=0,sizex=sizey/2,temp;
  u16 i=0,size1;
  if(sizey==8)size1=6;
  else size1=(sizey/8+((sizey%8)?1:0))*(sizey/2);
  c=chr-' ';//得到偏移后的值
  OLED_Set_Pos(x,y);
  for(i=0;i<size1;i++)
  {
    if(i%sizex==0&&sizey!=8) OLED_Set_Pos(x,y++);
    if(sizey==8)
    {
      temp=pgm_read_byte(&asc2_0806[c][i]);
      OLED_WR_Byte(temp,OLED_DATA);//6X8字号
    }
    else if(sizey==16) 
    {
      temp=pgm_read_byte(&asc2_1608[c][i]);
      OLED_WR_Byte(temp,OLED_DATA);//8x16字号
    }
    else return;
  }
}

//m^n函数
u32 oled_pow(u8 m,u8 n)
{
  u32 result=1;  
  while(n--)result*=m;    
  return result;
}
         
//显示数字
//x,y :起点坐标
//num:要显示的数字
//len :数字的位数
//sizey:字体大小      
void OLED_ShowNum(u8 x,u8 y,u32 num,u8 len,u8 sizey)
{           
  u8 t,temp,m=0;
  u8 enshow=0;
  if(sizey==8)m=2;
  for(t=0;t<len;t++)
  {
    temp=(num/oled_pow(10,len-t-1))%10;
    if(enshow==0&&t<(len-1))
    {
      if(temp==0)
      {
        OLED_ShowChar(x+(sizey/2+m)*t,y,' ',sizey);
        continue;
      }else enshow=1;
    }
    OLED_ShowChar(x+(sizey/2+m)*t,y,temp+'0',sizey);
  }
}

//显示一个字符号串
void OLED_ShowString(u8 x,u8 y,const char *chr,u8 sizey)
{
  u8 j=0;
  while (chr[j]!='\0')
  {   
    OLED_ShowChar(x,y,chr[j++],sizey);
    if(sizey==8)x+=6;
    else x+=sizey/2;
  }
}

//显示汉字
void OLED_ShowChinese(u8 x,u8 y,const u8 no,u8 sizey)
{
  u16 i,size1=(sizey/8+((sizey%8)?1:0))*sizey;
  u8 temp;
  for(i=0;i<size1;i++)
  {
    if(i%sizey==0) OLED_Set_Pos(x,y++);
    if(sizey==16) 
    {
      temp=pgm_read_byte(&Hzk[no][i]);
      OLED_WR_Byte(temp,OLED_DATA);//16x16字号
    }
    //else if(sizey==xx) OLED_WR_Byte(xxx[c][i],OLED_DATA);//用户添加字号
    else return;
  }       
}


//显示图片
//x,y显示坐标
//sizex,sizey,图片长宽
//BMP：要显示的图片
void OLED_DrawBMP(u8 x,u8 y,u8 sizex, u8 sizey,const u8 BMP[])
{   
  u16 j=0;
  u8 i,m,temp;
  sizey=sizey/8+((sizey%8)?1:0);
  for(i=0;i<sizey;i++)
  {
    OLED_Set_Pos(x,i+y);
    for(m=0;m<sizex;m++)
    {
       temp=pgm_read_byte(&BMP[j++]);
       OLED_WR_Byte(temp,OLED_DATA);
    }
  }
} 

//OLED的初始化
void OLED_Init(void)
{ 
  I2C_Init(); //初始化I2C 管脚输出高电平
  
  OLED_WR_Byte(0xAE,OLED_CMD);//--turn off oled panel
  OLED_WR_Byte(0x00,OLED_CMD);//---set low column address
  OLED_WR_Byte(0x10,OLED_CMD);//---set high column address
  OLED_WR_Byte(0x40,OLED_CMD);//--set start line address  Set Mapping RAM Display Start Line (0x00~0x3F)
  OLED_WR_Byte(0x81,OLED_CMD);//--set contrast control register
  OLED_WR_Byte(0xCF,OLED_CMD); // Set SEG Output Current Brightness
  OLED_WR_Byte(0xA1,OLED_CMD);//--Set SEG/Column Mapping     0xa0左右反置 0xa1正常
  OLED_WR_Byte(0xC8,OLED_CMD);//Set COM/Row Scan Direction   0xc0上下反置 0xc8正常
  OLED_WR_Byte(0xA6,OLED_CMD);//--set normal display
  OLED_WR_Byte(0xA8,OLED_CMD);//--set multiplex ratio(1 to 64)
  OLED_WR_Byte(0x3f,OLED_CMD);//--1/64 duty
  OLED_WR_Byte(0xD3,OLED_CMD);//-set display offset Shift Mapping RAM Counter (0x00~0x3F)
  OLED_WR_Byte(0x00,OLED_CMD);//-not offset
  OLED_WR_Byte(0xd5,OLED_CMD);//--set display clock divide ratio/oscillator frequency
  OLED_WR_Byte(0x80,OLED_CMD);//--set divide ratio, Set Clock as 100 Frames/Sec
  OLED_WR_Byte(0xD9,OLED_CMD);//--set pre-charge period
  OLED_WR_Byte(0xF1,OLED_CMD);//Set Pre-Charge as 15 Clocks & Discharge as 1 Clock
  OLED_WR_Byte(0xDA,OLED_CMD);//--set com pins hardware configuration
  OLED_WR_Byte(0x12,OLED_CMD);
  OLED_WR_Byte(0xDB,OLED_CMD);//--set vcomh
  OLED_WR_Byte(0x40,OLED_CMD);//Set VCOM Deselect Level
  OLED_WR_Byte(0x20,OLED_CMD);//-Set Page Addressing Mode (0x00/0x01/0x02)
  OLED_WR_Byte(0x02,OLED_CMD);//
  OLED_WR_Byte(0x8D,OLED_CMD);//--set Charge Pump enable/disable
  OLED_WR_Byte(0x14,OLED_CMD);//--set(0x10) disable
  OLED_WR_Byte(0xA4,OLED_CMD);// Disable Entire Display On (0xa4/0xa5)
  OLED_WR_Byte(0xA6,OLED_CMD);// Disable Inverse Display On (0xa6/a7) 
  OLED_Clear();
  OLED_WR_Byte(0xAF,OLED_CMD); /*display ON*/ 
}

oledfont.h

#ifndef __OLEDFONT_H
#define __OLEDFONT_H 
#include <avr/pgmspace.h>
const unsigned char BMP1[] PROGMEM =
{
  0x00,0x03,0x05,0x09,0x11,0xFF,0x11,0x89,0x05,0xC3,0x00,0xE0,0x00,0xF0,0x00,0xF8,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x44,0x28,0xFF,0x11,0xAA,0x44,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x83,0x01,0x38,0x44,0x82,0x92,
  0x92,0x74,0x01,0x83,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7C,0x44,0xFF,0x01,0x7D,
  0x7D,0x7D,0x01,0x7D,0x7D,0x7D,0x7D,0x01,0x7D,0x7D,0x7D,0x7D,0x7D,0x01,0xFF,0x00,
  0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x01,0x00,0x01,0x00,0x01,0x00,0x01,0x00,0x01,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,
  0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,
  0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x03,0x03,
  0xF3,0x13,0x11,0x11,0x11,0x11,0x11,0x11,0x01,0xF1,0x11,0x61,0x81,0x01,0x01,0x01,
  0x81,0x61,0x11,0xF1,0x01,0x01,0x01,0x01,0x41,0x41,0xF1,0x01,0x01,0x01,0x01,0x01,
  0xC1,0x21,0x11,0x11,0x11,0x11,0x21,0xC1,0x01,0x01,0x01,0x01,0x41,0x41,0xF1,0x01,
  0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x11,0x11,0x11,0x11,0x11,0xD3,0x33,
  0x03,0x03,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE0,0xE0,0x00,0x00,
  0x7F,0x01,0x01,0x01,0x01,0x01,0x01,0x00,0x00,0x7F,0x00,0x00,0x01,0x06,0x18,0x06,
  0x01,0x00,0x00,0x7F,0x00,0x00,0x00,0x00,0x40,0x40,0x7F,0x40,0x40,0x00,0x00,0x00,
  0x1F,0x20,0x40,0x40,0x40,0x40,0x20,0x1F,0x00,0x00,0x00,0x00,0x40,0x40,0x7F,0x40,
  0x40,0x00,0x00,0x00,0x00,0x60,0x00,0x00,0x00,0x00,0x40,0x30,0x0C,0x03,0x00,0x00,
  0x00,0x00,0xE0,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x07,0x06,0x06,
  0x06,0x06,0x04,0x04,0x04,0x84,0x44,0x44,0x44,0x84,0x04,0x04,0x84,0x44,0x44,0x44,
  0x84,0x04,0x04,0x04,0x84,0xC4,0x04,0x04,0x04,0x04,0x84,0x44,0x44,0x44,0x84,0x04,
  0x04,0x04,0x04,0x04,0x84,0x44,0x44,0x44,0x84,0x04,0x04,0x04,0x04,0x04,0x84,0x44,
  0x44,0x44,0x84,0x04,0x04,0x84,0x44,0x44,0x44,0x84,0x04,0x04,0x04,0x04,0x06,0x06,
  0x06,0x06,0x07,0x07,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x10,0x18,0x14,0x12,0x11,0x00,0x00,0x0F,0x10,0x10,0x10,
  0x0F,0x00,0x00,0x00,0x10,0x1F,0x10,0x00,0x00,0x00,0x08,0x10,0x12,0x12,0x0D,0x00,
  0x00,0x18,0x00,0x00,0x0D,0x12,0x12,0x12,0x0D,0x00,0x00,0x18,0x00,0x00,0x10,0x18,
  0x14,0x12,0x11,0x00,0x00,0x10,0x18,0x14,0x12,0x11,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,
  0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x7F,0x03,0x0C,0x30,0x0C,0x03,0x7F,0x00,0x00,0x38,0x54,0x54,0x58,0x00,0x00,
  0x7C,0x04,0x04,0x78,0x00,0x00,0x3C,0x40,0x40,0x7C,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xAA,0xAA,0xAA,
  0x28,0x08,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x03,0x0C,0x30,0x0C,0x03,0x7F,
  0x00,0x00,0x26,0x49,0x49,0x49,0x32,0x00,0x00,0x7F,0x02,0x04,0x08,0x10,0x7F,0x00,
};
/************************************6*8的点阵************************************/
const unsigned char asc2_0806[][6]PROGMEM ={
{0x00, 0x00, 0x00, 0x00, 0x00, 0x00},// sp
{0x00, 0x00, 0x00, 0x2f, 0x00, 0x00},// !
{0x00, 0x00, 0x07, 0x00, 0x07, 0x00},// "
{0x00, 0x14, 0x7f, 0x14, 0x7f, 0x14},// #
{0x00, 0x24, 0x2a, 0x7f, 0x2a, 0x12},// $
{0x00, 0x62, 0x64, 0x08, 0x13, 0x23},// %
{0x00, 0x36, 0x49, 0x55, 0x22, 0x50},// &
{0x00, 0x00, 0x05, 0x03, 0x00, 0x00},// '
{0x00, 0x00, 0x1c, 0x22, 0x41, 0x00},// (
{0x00, 0x00, 0x41, 0x22, 0x1c, 0x00},// )
{0x00, 0x14, 0x08, 0x3E, 0x08, 0x14},// *
{0x00, 0x08, 0x08, 0x3E, 0x08, 0x08},// +
{0x00, 0x00, 0x00, 0xA0, 0x60, 0x00},// ,
{0x00, 0x08, 0x08, 0x08, 0x08, 0x08},// -
{0x00, 0x00, 0x60, 0x60, 0x00, 0x00},// .
{0x00, 0x20, 0x10, 0x08, 0x04, 0x02},// /
{0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E},// 0
{0x00, 0x00, 0x42, 0x7F, 0x40, 0x00},// 1
{0x00, 0x42, 0x61, 0x51, 0x49, 0x46},// 2
{0x00, 0x21, 0x41, 0x45, 0x4B, 0x31},// 3
{0x00, 0x18, 0x14, 0x12, 0x7F, 0x10},// 4
{0x00, 0x27, 0x45, 0x45, 0x45, 0x39},// 5
{0x00, 0x3C, 0x4A, 0x49, 0x49, 0x30},// 6
{0x00, 0x01, 0x71, 0x09, 0x05, 0x03},// 7
{0x00, 0x36, 0x49, 0x49, 0x49, 0x36},// 8
{0x00, 0x06, 0x49, 0x49, 0x29, 0x1E},// 9
{0x00, 0x00, 0x36, 0x36, 0x00, 0x00},// :
{0x00, 0x00, 0x56, 0x36, 0x00, 0x00},// ;
{0x00, 0x08, 0x14, 0x22, 0x41, 0x00},// <
{0x00, 0x14, 0x14, 0x14, 0x14, 0x14},// =
{0x00, 0x00, 0x41, 0x22, 0x14, 0x08},// >
{0x00, 0x02, 0x01, 0x51, 0x09, 0x06},// ?
{0x00, 0x32, 0x49, 0x59, 0x51, 0x3E},// @
{0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C},// A
{0x00, 0x7F, 0x49, 0x49, 0x49, 0x36},// B
{0x00, 0x3E, 0x41, 0x41, 0x41, 0x22},// C
{0x00, 0x7F, 0x41, 0x41, 0x22, 0x1C},// D
{0x00, 0x7F, 0x49, 0x49, 0x49, 0x41},// E
{0x00, 0x7F, 0x09, 0x09, 0x09, 0x01},// F
{0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A},// G
{0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F},// H
{0x00, 0x00, 0x41, 0x7F, 0x41, 0x00},// I
{0x00, 0x20, 0x40, 0x41, 0x3F, 0x01},// J
{0x00, 0x7F, 0x08, 0x14, 0x22, 0x41},// K
{0x00, 0x7F, 0x40, 0x40, 0x40, 0x40},// L
{0x00, 0x7F, 0x02, 0x0C, 0x02, 0x7F},// M
{0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F},// N
{0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E},// O
{0x00, 0x7F, 0x09, 0x09, 0x09, 0x06},// P
{0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E},// Q
{0x00, 0x7F, 0x09, 0x19, 0x29, 0x46},// R
{0x00, 0x46, 0x49, 0x49, 0x49, 0x31},// S
{0x00, 0x01, 0x01, 0x7F, 0x01, 0x01},// T
{0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F},// U
{0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F},// V
{0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F},// W
{0x00, 0x63, 0x14, 0x08, 0x14, 0x63},// X
{0x00, 0x07, 0x08, 0x70, 0x08, 0x07},// Y
{0x00, 0x61, 0x51, 0x49, 0x45, 0x43},// Z
{0x00, 0x00, 0x7F, 0x41, 0x41, 0x00},// [
{0x00, 0x55, 0x2A, 0x55, 0x2A, 0x55},// 55
{0x00, 0x00, 0x41, 0x41, 0x7F, 0x00},// ]
{0x00, 0x04, 0x02, 0x01, 0x02, 0x04},// ^
{0x00, 0x40, 0x40, 0x40, 0x40, 0x40},// _
{0x00, 0x00, 0x01, 0x02, 0x04, 0x00},// '
{0x00, 0x20, 0x54, 0x54, 0x54, 0x78},// a
{0x00, 0x7F, 0x48, 0x44, 0x44, 0x38},// b
{0x00, 0x38, 0x44, 0x44, 0x44, 0x20},// c
{0x00, 0x38, 0x44, 0x44, 0x48, 0x7F},// d
{0x00, 0x38, 0x54, 0x54, 0x54, 0x18},// e
{0x00, 0x08, 0x7E, 0x09, 0x01, 0x02},// f
{0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C},// g
{0x00, 0x7F, 0x08, 0x04, 0x04, 0x78},// h
{0x00, 0x00, 0x44, 0x7D, 0x40, 0x00},// i
{0x00, 0x40, 0x80, 0x84, 0x7D, 0x00},// j
{0x00, 0x7F, 0x10, 0x28, 0x44, 0x00},// k
{0x00, 0x00, 0x41, 0x7F, 0x40, 0x00},// l
{0x00, 0x7C, 0x04, 0x18, 0x04, 0x78},// m
{0x00, 0x7C, 0x08, 0x04, 0x04, 0x78},// n
{0x00, 0x38, 0x44, 0x44, 0x44, 0x38},// o
{0x00, 0xFC, 0x24, 0x24, 0x24, 0x18},// p
{0x00, 0x18, 0x24, 0x24, 0x18, 0xFC},// q
{0x00, 0x7C, 0x08, 0x04, 0x04, 0x08},// r
{0x00, 0x48, 0x54, 0x54, 0x54, 0x20},// s
{0x00, 0x04, 0x3F, 0x44, 0x40, 0x20},// t
{0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C},// u
{0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C},// v
{0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C},// w
{0x00, 0x44, 0x28, 0x10, 0x28, 0x44},// x
{0x00, 0x1C, 0xA0, 0xA0, 0xA0, 0x7C},// y
{0x00, 0x44, 0x64, 0x54, 0x4C, 0x44},// z
{0x14, 0x14, 0x14, 0x14, 0x14, 0x14},// horiz lines

};


//8*16 ASCII字符集点阵
const unsigned char asc2_1608[][16] PROGMEM ={    
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*" ",0*/
{0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00},/*"!",1*/
{0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*""",2*/
{0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00},/*"#",3*/
{0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00},/*"$",4*/
{0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00},/*"%",5*/
{0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10},/*"&",6*/
{0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"'",7*/
{0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00},/*"(",8*/
{0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00},/*")",9*/
{0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00},/*"*",10*/
{0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00},/*"+",11*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00},/*",",12*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01},/*"-",13*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00},/*".",14*/
{0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00},/*"/",15*/
{0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00},/*"0",16*/
{0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00},/*"1",17*/
{0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00},/*"2",18*/
{0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00},/*"3",19*/
{0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00},/*"4",20*/
{0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00},/*"5",21*/
{0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00},/*"6",22*/
{0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00},/*"7",23*/
{0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00},/*"8",24*/
{0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00},/*"9",25*/
{0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00},/*":",26*/
{0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00},/*";",27*/
{0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00},/*"<",28*/
{0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00},/*"=",29*/
{0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00},/*">",30*/
{0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00},/*"?",31*/
{0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00},/*"@",32*/
{0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20},/*"A",33*/
{0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00},/*"B",34*/
{0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00},/*"C",35*/
{0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00},/*"D",36*/
{0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00},/*"E",37*/
{0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00},/*"F",38*/
{0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00},/*"G",39*/
{0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20},/*"H",40*/
{0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00},/*"I",41*/
{0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00},/*"J",42*/
{0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00},/*"K",43*/
{0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00},/*"L",44*/
{0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00},/*"M",45*/
{0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00},/*"N",46*/
{0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00},/*"O",47*/
{0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00},/*"P",48*/
{0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00},/*"Q",49*/
{0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20},/*"R",50*/
{0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00},/*"S",51*/
{0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00},/*"T",52*/
{0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00},/*"U",53*/
{0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00},/*"V",54*/
{0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00},/*"W",55*/
{0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20},/*"X",56*/
{0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00},/*"Y",57*/
{0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00},/*"Z",58*/
{0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00},/*"[",59*/
{0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00},/*"\",60*/
{0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00},/*"]",61*/
{0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"^",62*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80},/*"_",63*/
{0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"`",64*/
{0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20},/*"a",65*/
{0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00},/*"b",66*/
{0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00},/*"c",67*/
{0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20},/*"d",68*/
{0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00},/*"e",69*/
{0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00},/*"f",70*/
{0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00},/*"g",71*/
{0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20},/*"h",72*/
{0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00},/*"i",73*/
{0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00},/*"j",74*/
{0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00},/*"k",75*/
{0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00},/*"l",76*/
{0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F},/*"m",77*/
{0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20},/*"n",78*/
{0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00},/*"o",79*/
{0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00},/*"p",80*/
{0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80},/*"q",81*/
{0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00},/*"r",82*/
{0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00},/*"s",83*/
{0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00},/*"t",84*/
{0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20},/*"u",85*/
{0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00},/*"v",86*/
{0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00},/*"w",87*/
{0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00},/*"x",88*/
{0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00},/*"y",89*/
{0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00},/*"z",90*/
{0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40},/*"{",91*/
{0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00},/*"|",92*/
{0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00},/*"}",93*/
{0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"~",94*/
};  
const unsigned char Hzk[][32] PROGMEM ={
{0x00,0x00,0xF0,0x10,0x10,0x10,0x10,0xFF,0x10,0x10,0x10,0x10,0xF0,0x00,0x00,0x00,0x00,0x00,0x0F,0x04,0x04,0x04,0x04,0xFF,0x04,0x04,0x04,0x04,0x0F,0x00,0x00,0x00},/*"中",0*/
{0x40,0x40,0x40,0x5F,0x55,0x55,0x55,0x75,0x55,0x55,0x55,0x5F,0x40,0x40,0x40,0x00,0x00,0x40,0x20,0x0F,0x09,0x49,0x89,0x79,0x09,0x09,0x09,0x0F,0x20,0x40,0x00,0x00},/*"景",1*/
{0x00,0xFE,0x02,0x42,0x4A,0xCA,0x4A,0x4A,0xCA,0x4A,0x4A,0x42,0x02,0xFE,0x00,0x00,0x00,0xFF,0x40,0x50,0x4C,0x43,0x40,0x40,0x4F,0x50,0x50,0x5C,0x40,0xFF,0x00,0x00},/*"园",2*/
{0x00,0x00,0xF8,0x88,0x88,0x88,0x88,0xFF,0x88,0x88,0x88,0x88,0xF8,0x00,0x00,0x00,0x00,0x00,0x1F,0x08,0x08,0x08,0x08,0x7F,0x88,0x88,0x88,0x88,0x9F,0x80,0xF0,0x00},/*"电",3*/
{0x80,0x82,0x82,0x82,0x82,0x82,0x82,0xE2,0xA2,0x92,0x8A,0x86,0x82,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0x80,0x7F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"子",4*/
{0x10,0x10,0x10,0xFF,0x10,0x90,0x08,0x88,0x88,0x88,0xFF,0x88,0x88,0x88,0x08,0x00,0x04,0x44,0x82,0x7F,0x01,0x80,0x80,0x40,0x43,0x2C,0x10,0x28,0x46,0x81,0x80,0x00},/*"技",5*/
{0x00,0x10,0x10,0x10,0x10,0xD0,0x30,0xFF,0x30,0xD0,0x12,0x1C,0x10,0x10,0x00,0x00,0x10,0x08,0x04,0x02,0x01,0x00,0x00,0xFF,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x00},/*"术",6*/

};


#endif

本文内容由网友自发贡献，版权归原作者所有，本站不承担相应法律责任。如您发现有涉嫌抄袭侵权的内容，请联系:hwhale#tublm.com(使用前将#替换为@)

esp8266

96OLED

I2C

驱动显示

ESP8266+0.96OLED驱动显示（I2C）的相关文章

（2）STM32+ESP8266+手机网络助手实现AP模式通信

文章目录 1 实验目的及资源 1 1 目的 1 2 资源 2 串口调试wifi模块 2 1 接线 2 2 AT指令测试 2 3 与手机app通信 3 STM32通过wifi与手机app通信 3 1 使用资源 3 2 串口3初始化 3 3 e
ESP8266+天猫精灵+贝壳物联简单直接点亮一个LED灯

本文将介绍如何通过天猫精灵透过贝壳物联来使ESP8266点亮一个灯如果大家途中遇到什么奇葩问题请努力移驾各大搜索神器或查看贝壳物联帮助文档解决正所谓冤有头本文主要分为以下几个部分哦硬件部分软件下载软件工具和软件固件固件刷写
【STM32F4】STM32F407+ESP8266连接机智云过程详解

要求通过手机上的机智云通用APP 点亮开发板载LED0 LED1 摘要硬件组成 STM32F407ZGT6 esp8266 乐鑫软件APP 机智云开发都者中心下载的通用APP Demo Xcom串口调试助手 Keil V5 调试过程详
esp8266学习笔记（5）——连接wifi、AP、UDP通信

终于开始接触网络了基础不行这个摸索了有点久还好网上资料多有些细节还是没有怎么吃透哈哈开始联网了 ESP8266有三种模式 station模式 0x01 soft AP模式 0x02 soft AP station模式 0x03
CORE-ESP32C3

目录参考博文源于网友oled eink aht10项目源代码修改及复现说明主要修改显示效果编辑硬件准备软件版本日志及soc下载工具软件使用接线说明天气显示屏硬件接线温度采集日期温度显示屏正常初始化LOG 示例代
ESP8266-NodeMCU网络服务器（一）- 数字时钟制作

文章目录效果所需环境实现步骤原理 HTML JS代码上传文件到闪存系统上传程序效果所需环境 ESP8266 NodeMCU 开发板以下简称NodeMCU ESP8266库 Arduino IDE 代码编写工具无线热点
ESP8266红外检测安全系统

我们每个人都想知道不在家时家中所发生的事情这与安全性或天然气火或水等关键要素有关知道发生了什么事情的瞬间对于将最终损坏降至最低至关重要我们将重点介绍PIR传感器但是相同的原理也适用于其他传感器例如湿度气体或烟雾传感器无源红
解决vscode找不到arduino esp8266头文件

用Arduino IDE写ESP8266没有代码补全不能跳转查看头文件个人觉得这是最难受的 vscode装上Microsoft的arduino扩展后有时候会找不到头文件刚开始自己傻傻的一个个往includePath里面添加后来在引
基于STM32、OV2640及ESP8266的无线图传

一简介本文利用STM32F407单片机 OV2640摄像机模块以及ESP8266 WIFI模块并基于C 编写的TCP上位机服务来实现图像的无线传输本文受启发于博客 ESP8266 STM32F407 OV7670实现图片传输在此
NodeMcu arduino ESP8266WIFI 模块例程 WIFIClienBasic（TCP服务器发送信息）

NodeMcu arduino ESP8266WIFI 模块 WIFIClienBasic TCP服务器发送信息流程配置连接网络发送TCP请求获取接受数据打印 This sketch sends a string to a TCP
玩转ESP8266-01——AT指令集

该指令集是接上一个链接初识AT指令全部是根据本人在使用esp8266过程中用过的指令可能有不全有错误还请理解指正一起学习 AT指令集一基础指令 1 测试指令 2 复位指令重启二设置指令 1 设置波特率 2 设置工作模
尝试通过 I2C 从 Arduino 获取数据时，出现 IOError：[Errno 121] python（树莓派）上的 smbus 远程 I/O 错误

我遇到了问题在启动通过 I2C 从 Arduino 请求数据的脚本时 python 有时会在我的 raspberry pi 3 上抛出这个 IOError 电气连接是完美的所以这不是问题此外我在使用 i2cget y 1 0x04
使用 MQTT 代理对 ESP8266 Wemos D1 Mini 进行 SSL 证书验证

我有一个树莓派 3 其操作系统为 raspbianstretch 我已经按照本教程在树莓派上安装并完全配置了 MQTT 代理 https www digitalocean com community tutorials how to ins
ESP8266 在简单的 http 请求后崩溃

我正在使用 NodeMCU V3 模块每当我尝试向服务器发出 http 请求时模块就会崩溃这是代码 void setup WiFi begin wifi name wifi password while WiFi status WL
如何将 I2C 地址传递给 Adafruit CircuitPython 代码？（运行 ADS1115）

我正在尝试使用两个 I2C 地址 0x48 0x49 在一个 Raspberry Pi 上运行两个 Adafruit ADS1115 每个设备的地址可以通过将 ADDR 引脚连接为高电平 0x49 或使其悬空默认为 0x48 来设置我已
Sntp.sync() 忽略服务器

我一直在尝试与 ntp 服务器同步时间但是 nodemcu 似乎忽略了服务器参数 sync lua sntp sync fr pool ntp org function tm rtctime epoch2cal rtctime get p
使用 SPIFFS 加载文件时出现问题 (ERR_CONTENT_LENGTH_MISMATCH)

好吧这两天我一直在研究这个问题但我仍然觉得我一无所获我最近开始使用SPIFFS 文件系统 for Arduino开发于呼扎 ESP8266像FSBrowser ino例如虽然它在分离代码方面非常出色但随着我的代码不断增长它在稳定
如何转换温度传感器得到的值？

我在ST工作Temperature sensor hts221 我用I2C与传感器的命令通信我从文档中看到类似以下文字 enter code here Temperature data are expressed as TEMP OUT
KAA 0.10.0 中使用 ESP8266 SDK 编译错误

我根据以下内容构建了ESP8266 SDK这个文件 https kaaproject github io kaa docs v0 10 0 Programming guide Using Kaa endpoint SDKs C SDK ES
编写I2C设备驱动时探测问题

我是编写Linux设备驱动程序的新手如果有什么愚蠢的问题和我糟糕的英语请原谅我我正在尝试为触摸屏编写一个驱动程序它通过 I2C 与 CPU 通信我尝试在linux平台上添加设备驱动程序注册成功我的意思是驱动程序已加载但探测功能

随机推荐

python数据爬下来保存在哪里

昨天下班后忽然兴起想写一个爬虫抓抓网页上的东西花了一个钟简单学习了python的基础语法 xff0c 然后参照网上的例子自己写了个爬虫 xff08 推荐学习 xff1a Python视频教程 xff09 python数据爬下来保存在本地
python求平均值

python求平均值首先我们先来了解一下计算平均数的IPO模式输入 xff1a 待输入计算平均数的数处理 xff1a 平均数算法输出 xff1a 平均数推荐 xff1a python教程明白了程序的IPO模式之后 xff0c 我
如何用for循环实现一个无限循环

使用while True可以轻松的实现一个无限循环 xff0c 也叫死循环 xff0c 那么for循环能够实现类似的功能么 xff1f 当然可以 xff0c 借助itertools模块的cycle函数就可以 import time from
闲得发慌之趣味技能：python之猫脸检测

Python 小猫检测 xff0c 通过调用opencv自带的猫脸检测的分类器进行检测分类器有两个 xff1a haarcascade frontalcatface xml和 haarcascade frontalcatface exte
目标检测性能的衡量指标：mAP图解

最近又重新复习了下mAP xff0c 在网上找了有关mAP的文章 xff0c 但是感觉大多数都是左抄一点又抄一点那种写的比较乱 xff0c 可能因为mAP的计算方法前后变过几次 xff0c 所以导致有很多版本的说法存在为了更好的理解 x
热门编程——python

python是干什么的 xff1f 要找出python火爆的原因 xff0c 我们就不得不先来了解python本身 Python 是一种面向对象的解释型计算机程序设计语言 xff0c 由荷兰人 Guido van Rossum 于 1989
Python求两个数的最大公约数

一求最大公约数算法整数A对整数B进行取整余数用整数C来表示举例 C 61 A B 如果C等于0 则C就是整数A和整数B的最大公约数如果C不等于0 将B赋值给A 将C赋值给B 然后进行 1 2 两步直到余数为0 则可以得知最大公约
VINS-MONO学习笔记 [基于滑动窗口的非线性优化]

目录 1 代码2 ceres解析求导3 ceres李代数加法代码实现4 预积分约束残差计算5 预积分雅克比计算6 视觉重投影约束7 滑动窗口边缘化 1 代码代码位置 xff1a vins estimator gt src gt estim
CMakeLists入门

目录基础增加依赖库将 cpp文件编译成一个库 xff0c 供其他文件调用 xff1a 变量名list自动检测编译器是否支持C 43 43 11add definitionsinclude directoriestarget includ
记录一次rviz无法启动，报错segmentation fault (core dumped)的解决过程

起因好久没有使用ROS相关程序了 xff0c 突然想运行莫程序发现rviz打不开仔细定位后发现在终端直接输入rviz也无法打开经过在网上尝试搜索了好几个小时 xff0c 尝试了以下各种方法 xff0c 更新3D graphics l
ROS创建功能包

ROS创建自己的功能包 ROS中工作空间 workspace 是一个存放工程开发相关文件的文件夹 xff0c 其中有四个文件夹 src 代码空间 Source Space build 编译空间 Build Space devel 开发空间
webpack中的加载器（loader）

一了解webpack加载器 1 webpack加载器 xff08 loader xff09 的作用在实际开发过程中 xff0c webpack默认只能打包处理以 js后缀名结尾的模块 xff0c 其他非 js后缀名结尾的模块 xff0c
python画图（线条颜色、大小、类型：点、虚线等）（图文详细入门教程四）

初衷本人由于平常写论文需要输出一些结果图 xff0c 但是苦于在网上搜python画图时 xff0c 详细的教程非常多 xff0c 但是就是找不到能马上解决自己问题那一行代码 xff0c 所以打算写一些适合需求简单的朋友应急用的教程 xf
Linux常用命令详解 xfs文件系统的备份与还原 xfsdump和xfsrestore命令详解

Linux常用命令详解 xfs文件系统的备份与还原 xfsdump和xfsrestore命令详解一引言 1 xfsdump xff1a xfs文件系统的备份 2 xfsstore xff1a xfs文件系统的还原二命令具体介绍与用法
小白入门gitee（码云）

文章目录一介绍二注册账户三本地环境的配置1 如果是在linux系统2 如果是windows系统四本地代码库的操作1 基本概念2 命令操作五远程代码库的操作1 下载远程代码库的代码2 同步远程仓库 xff08 上传代码 xff
ubuntu：安装cmake后查看版本报错：CMake Error: Could not find CMAKE_ROOT !!!

问题描述 xff1a ubuntu18原来安装过cmake xff0c 想升级下版本 xff0c 在安装新版本的cmake完成后 xff0c 输入指令 xff1a cmake version 查看版本号时出现以下错误 xff1a CMake
g++ 编译选项

返回主页 lsgxeva MyGitee https gitee com lsgx MyGithub https github com lsgxeva 博客园首页新随笔联系订阅管理随笔 437 文章 0 评论 1 GCC 警告优化以及调
STM32CubMx+FreeRTOS互斥锁和递归互斥锁（五）

文章目录 FreeRTOS系统一简绍二 STM32CubMx配置1 准备2 添加互斥锁2添加递归互斥锁三互斥锁1 代码2 测试四递归互斥锁1 代码2 测试 FreeRTOS系统一简绍互斥锁 xff0c 谁获得的消息谁来释放
ESP8266-12F最小系统板程序烧录

文章目录 ESP8266一简介二准备1 ESP8266 12F系统板2 转接板3 USB转串口模块4 烧录软件三连接烧录四下载 ESP8266 一简介前一段时间一直用ESP8266 12F开发板来学习开发 xff0c 但是最近
ESP8266+0.96OLED驱动显示（I2C）

文章目录 ESP8266一简介二管脚定义三代码 ESP8266 一简介这篇我们说一下ESP8266来驱动OLED显示屏显示 xff0c 这里使用的是I2C的屏幕 xff0c 像Arduino中有好几个库可以驱动屏幕 xff0c 但