1. tool
Open DHCP Server
Open Source Freeware Windows/Linux. MultiSubnet MultiDomain DHCP Server supports every Industry Standard Feature and DHCP Option.
In addition, two instances can be installed, which work in load shared fail safe mode. If one DHCP Server goes down, other can still renew the leases issued by failed server. Database of both servers remain in Synch and there are never any duplicate leases. It supports features like:-
-
Dynamic and Static Leases
-
Upto 125 DHCP Ranges and Upto 125 Listening Interfaces
-
MultiSubnet and Multiple Domains.
-
Relay Agents, BOOTP and PXE Boot
-
Automated, sophisticated DHCP Range Selection
-
DHCP Range Filters based on Mac, Vendor and User Class
-
Options can be specified Client Specific, Range Specific or Global
-
Lease Status in auto refreshing html page
-
Supports Duplicated Replicated Operation
-
Very simple to install and use, even by person not having DHCP concepts
-
Very low memory and CPU use
2. 配置
打开Configure文件,进行dhcp server配置
1)监听接口
Open DHCP Server only listens on Static Interfaces which means the IP
address is fixed and not obtained from another DHCP Server. Any dynamic interfaces specified here will
be ignored. If no interface is specified here, Open DHCP Server listens on all Static Interfaces.
2)地址分配范围
DHCP Server will allot addresses from these ranges.
3. test
环境:PC通过网线直连开发板
PC端IP地址:192.168.1.3
3.1 PC
1) 配置DHCP server
打开Configure文件
添加ip地址分配范围,需要与PC的静态IP地址保持同一个网段
2)执行"Run Stand Alone"
3.2 开发板板
linux测试:
本文内容由网友自发贡献,版权归原作者所有,本站不承担相应法律责任。如您发现有涉嫌抄袭侵权的内容,请联系:hwhale#tublm.com(使用前将#替换为@)