从6100-01-01-0823升级到6100-05-00-1016
一.下载补丁：
下载地址：http://www-912.ibm.com/eserver/support/fixes/
Product Group ->"System p"
Product ->"AIX"
Version->"6.1"
Fix type->"Fix packs"
Continue
Select a Technology Level ->"TL 6100-05-00-1015"
Go
单击 6100-05-01-1016 (Service Pack)
选择 Yes,include Technology Level 6100-05 with the Service Pack //如果当前版本和要升级的版本的TL不同，需要选择Yes，同一个TL内的升级则不需要。
Continue
选择 Download using Bulk FTP
Continue
获得以下信息：
******************************************
Fix package location
FTP server delivery04-mul.dhe.ibm.com
Userid anonymous
Password Send any password
Directory /ecc/hsb/H16828472
This package will be available for the next 72 hours.
FTP hints
Most FTP command line programs support getting multiple files with one subcommand. The subcommand is mget. Before you run mget you should first set the download type to binary, and then disable prompting. Binary mode should be set in all cases. When you disable prompts, the mget command runs without requiring user intervention.
Example
ftp>binary
ftp>prompt
ftp>mget *.bff
********************************************
D:\SP_5300-12-01-1016>ftp delivery04-mul.dhe.ibm.com
连接到 dispmy-115.mul.ie.ibm.com。
220-*******************************************************************************
220-* *
220-* IBM's internal systems must only be used for conducting IBM's *
220-* business or for purposes authorized by IBM management. *
220-* *
220-* Use is subject to audit at any time by IBM management. *
220-* *
220-*******************************************************************************
220-
220 dhempdel04.mul.ie.ibm.com FTP server (Version wu-2.6.2(5) Custom Thu Dec 8 12:55:22 MST 2005) ready.
用户(dispmy-115.mul.ie.ibm.com:(none)): anonymous
331 Guest login ok, send any password.
密码:
230 Guest login ok, access restrictions apply.
ftp> cd /ecc/hsb/H16830783
250 CWD command successful.
ftp> binary
200 Type set to I.
ftp> prompt
交互模式 关 。
ftp> mget *.bff
200 Type set to I.
200 PORT command successful.
150 Opening BINARY mode data connection for U465631.bff (8192 bytes).
226 Transfer complete.
ftp: 收到 8192 字节，用时 0.94秒 8.73千字节/秒。
200 PORT command successful.
......
下载完毕!
二.安装补丁：
Before installation Before you begin the installation of this package, please note the following:
1.You must be logged in as the root user to install this package.
2.IBM recommends creating a system backup before starting the installation procedure.
3.The latest AIX installation hints and tips for your version of AIX are available from the IBM Subscription service for Unix and Linux web site:
http://www14.software.ibm.com/webapp/set2/subscriptions/pqvcmjd
These tips contain important information that should be reviewed before installing this update.
4.IBM recommends creating a separate file system for /usr/sys/inst.images for the following reasons:
Downloaded fix packages require a significant amount of disk space.
By creating a separate file system, you prevent the expansion of the /usr file system.
--------------------------------------------------------------------------------
Package installation Follow these steps to install the update package:
1.Always run the inutoc command to ensure the installation subsystem will recognize the new fix packages you download. This command creates a new .toc file for the fix package. Run the inutoc command in the same directory where you downloaded the package filesets. For example, if you downloaded the filesets to /usr/sys/inst.images, run the following command:
inutoc /usr/sys/inst.images
(Optional): Renaming the *.bff files is not necessary, but does help you see which filesets are affected by the downloaded files. To rename the downloaded files to their fileset name, run the bffcreate command. After renaming the files, run the inutoc command again. For example, if you downloaded the filesets to /usr/sys/inst.images, run the following command to rename them:
bffcreate -c -d /usr/sys/inst.images
2.For all updates
To install all updates from this package that apply to the installed filesets on your system, use the following command:
smit update_all
It is highly recommended that you apply all updates from this package.
3.Reboot the system. A reboot is required for this update to take effect.
--------------------------------------------------------------------------------
After installation You may wish to retain this package for future use. When you install additional operating system software you will want to use this package to bring the additional software up to this level.
You can create a list of the APARs closed in this package, which you can then view (and search) in an ASCII editor, such as vi or emacs. First, create the .toc file for the package by using the inutoc command described above. Then, run the following command to extract the APAR listings from the .toc file:
grep ^I .toc > apar.list
Run the following command to eliminate duplicate entries from the apar.list file:
sort -u apar.list -o sorted.apars
来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/23135684/viewspace-662032/，如需转载，请注明出处，否则将追究法律责任。
